LibJacket on Amazon AWS

[Old posts from the commercial version of ArrayFire] Issues and comments for download and installation. Getting up and running.

Moderators: melonakos, pavanky

LibJacket on Amazon AWS

Postby ashin411 » Tue Dec 06, 2011 12:42 am

Hi,

I'm attempting to run LibJacket on the GPU available on Amazon AWS. I followed the instructions on AccelerEyes's blog but get stuck when trying to download LibJacket. I get the following error:


$ wget -c http://www.accelereyes.com/download_libjacket
--2011-12-06 04:40:08-- http://www.accelereyes.com/download_libjacket
Resolving www.accelereyes.com... 97.65.157.51
Connecting to www.accelereyes.com|97.65.157.51|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
download_libjacket: Permission denied

Cannot write to “download_libjacket” (Permission denied).


I'm I downloading the incorrect file?

Thanks in advance!
ashin411
 
Posts: 3
Joined: Tue Dec 06, 2011 12:24 am

Re: LibJacket on Amazon AWS

Postby pavanky » Tue Dec 06, 2011 4:06 pm

Hi Ashin,

That was a slightly older post. For now you will need to download arrayfire by going to our website (Www.accelereyes.com) and upload it manually to the amazon AWS.

--
Pavan
Pavan Yalamanchili,
ArrayFire
--
~ If it is not broken, you have not tried hard enough ~
User avatar
pavanky
Site Admin
 
Posts: 1123
Joined: Mon Mar 15, 2010 7:39 pm
Location: Atlanta, GA

Re: LibJacket on Amazon AWS

Postby ashin411 » Wed Dec 07, 2011 1:58 am

Thanks Pavan.

I got libjacket loaded onto my EC2 instance. When I attempt to run setup.py, I get the output below. I'm I missing a setup?


[ec2-user@ip-10-17-10-122 python]$ sudo python setup.py install && rm -rf build
copying ../lib64/libjacket_python.so to module
running install
running build
running build_py
creating build
creating build/lib
creating build/lib/jacket
copying module/unary.py -> build/lib/jacket
copying module/generators.py -> build/lib/jacket
copying module/__init__.py -> build/lib/jacket
copying module/special.py -> build/lib/jacket
copying module/base.py -> build/lib/jacket
copying module/array.py -> build/lib/jacket
copying module/gfx.py -> build/lib/jacket
copying module/libjacket_python.so -> build/lib/jacket
running install_lib
creating /usr/lib/python2.6/site-packages/jacket
copying build/lib/jacket/unary.py -> /usr/lib/python2.6/site-packages/jacket
copying build/lib/jacket/generators.py -> /usr/lib/python2.6/site-packages/jacket
copying build/lib/jacket/__init__.py -> /usr/lib/python2.6/site-packages/jacket
copying build/lib/jacket/special.py -> /usr/lib/python2.6/site-packages/jacket
copying build/lib/jacket/base.py -> /usr/lib/python2.6/site-packages/jacket
copying build/lib/jacket/array.py -> /usr/lib/python2.6/site-packages/jacket
copying build/lib/jacket/gfx.py -> /usr/lib/python2.6/site-packages/jacket
copying build/lib/jacket/libjacket_python.so -> /usr/lib/python2.6/site-packages/jacket
byte-compiling /usr/lib/python2.6/site-packages/jacket/unary.py to unary.pyc
byte-compiling /usr/lib/python2.6/site-packages/jacket/generators.py to generators.pyc
byte-compiling /usr/lib/python2.6/site-packages/jacket/__init__.py to __init__.pyc
byte-compiling /usr/lib/python2.6/site-packages/jacket/special.py to special.pyc
byte-compiling /usr/lib/python2.6/site-packages/jacket/base.py to base.pyc
byte-compiling /usr/lib/python2.6/site-packages/jacket/array.py to array.pyc
byte-compiling /usr/lib/python2.6/site-packages/jacket/gfx.py to gfx.pyc
running install_egg_info
Writing /usr/lib/python2.6/site-packages/jacket-0.1-py2.6.egg-info
rm: cannot remove `build/lib/jacket/unary.py': Permission denied
rm: cannot remove `build/lib/jacket/generators.py': Permission denied
rm: cannot remove `build/lib/jacket/__init__.py': Permission denied
rm: cannot remove `build/lib/jacket/special.py': Permission denied
rm: cannot remove `build/lib/jacket/base.py': Permission denied
rm: cannot remove `build/lib/jacket/array.py': Permission denied
rm: cannot remove `build/lib/jacket/gfx.py': Permission denied
rm: cannot remove `build/lib/jacket/libjacket_python.so': Permission denied
[ec2-user@ip-10-17-10-122 python]$
ashin411
 
Posts: 3
Joined: Tue Dec 06, 2011 12:24 am

Re: LibJacket on Amazon AWS

Postby pavanky » Wed Dec 07, 2011 11:24 am

HI Ashin,

Libjacket is installed properly. The build directory was not deleted which is not an issue. You can just do 'sudo rm -rf build' to remove the build directory.
Pavan Yalamanchili,
ArrayFire
--
~ If it is not broken, you have not tried hard enough ~
User avatar
pavanky
Site Admin
 
Posts: 1123
Joined: Mon Mar 15, 2010 7:39 pm
Location: Atlanta, GA

Re: LibJacket on Amazon AWS

Postby malcolm » Tue Dec 20, 2011 5:10 pm

This thread is also related to arrayfire download and install on EC2
James Malcolm (malcolm@accelereyes.com)
User avatar
malcolm
 
Posts: 600
Joined: Sat Jun 14, 2008 11:00 pm


Return to [archive-commercial] Download & Installation

cron