does it work with mac osx 10.7?

[Old posts from the commercial version of ArrayFire] Issues and comments for download and installation. Getting up and running.

Moderators: melonakos, pavanky

does it work with mac osx 10.7?

Postby smarchesini » Wed Jul 27, 2011 5:51 pm

Hi, I have a mac pro OSX 10.7 with a quadro 4000,
CUDA driver 4.0.21, GPU driver 7.2.9.270.05.05f01,
matlab R2011a 64 bit,
from gactivate I get the following message:
...
Multi-GPU: Licensed for 2 GPUs

JACKET FAILED TO ACTIVATE PROPERLY.

??? Error using ==> gpu_entry
An error occured while attempting to read the driver version

Error in ==> /usr/local/jacket/engine/gactivate.p>gactivate at 100

what's wrong? thanks, S.
smarchesini
 
Posts: 16
Joined: Mon Feb 09, 2009 4:21 pm

Re: does it work with mac osx 10.7?

Postby malcolm » Tue Aug 02, 2011 10:22 am

Hi Stefano,
Sorry for the delay.

We don't have a Lion computer handy to check, but we temporarily disabled that error in the nightly build: http://accelereyes.com/nightly/ -- so you should be good to go again.

Once we upgrade our mac systems to Lion, we'll dig into what changed with how the NVIDIA driver is detected.

Be sure to check if there's a new NVIDIA driver for 10.7 -- all I can find is this version that says 10.6.8 or later, which may be enough Software Update doesn't report anything.
Jimi
James Malcolm (malcolm@accelereyes.com)
User avatar
malcolm
 
Posts: 600
Joined: Sat Jun 14, 2008 11:00 pm

Re: does it work with mac osx 10.7?

Postby bjornsol » Thu Aug 04, 2011 9:19 am

I was getting the same error as Stefano and downloaded the Nightly builde. But I still get the same error error:
Code: Select all
Jacket v1.8 (build 3f297e4) by AccelerEyes
License Type: Designated Computer (on 64-bit Mac OS X)
Trial license expires in 15 days.
Licensed Addons: SDK, JMC, DLA, SLA
Multi-GPU: Licensed for 16 GPUs

JACKET FAILED TO ACTIVATE PROPERLY.

??? Error using ==> gpu_entry
An error occured while attempting to read the driver version

Error in ==> /Applications/Jacket/engine/gactivate.p>gactivate at 100


I´m on a mid 2009 MacBook Pro with NVIDIA GeForce 9600M GT (512MB) running MatLab R2011a.
bjornsol
 
Posts: 1
Joined: Thu Aug 04, 2011 8:40 am

Re: does it work with mac osx 10.7?

Postby sandeep » Thu Aug 04, 2011 5:57 pm

Hi bjornsol,

Apologies for the confusion - the fix is not in the nightly yet, as there was a test failure on another issue. We should have it out soon: I'll make a post here when it is ready. Thanks for your patience!
Sandeep Maddipatla
Software Developer
AccelerEyes LLC
Atlanta, GA USA
E: sandeep@accelereyes.com
W: http://www.accelereyes.com
User avatar
sandeep
 
Posts: 224
Joined: Wed Jul 08, 2009 11:46 am

Re: does it work with mac osx 10.7?

Postby Reekah » Sun Aug 21, 2011 1:24 pm

Oh, then I'll keep an eye at this thread, too, to learn when the solution will be ready. Hope it won't take too long.

___________________
app development
Last edited by Reekah on Sat Sep 10, 2011 8:33 pm, edited 1 time in total.
Reekah
 
Posts: 1
Joined: Sat Aug 20, 2011 8:47 am

Re: does it work with mac osx 10.7?

Postby sandeep » Tue Aug 23, 2011 12:05 pm

Hi Everyone,

Just wanted to update this thread: we had the fix ready a few days back: you can obtain it from the nightly download page: www.accelereyes.com/nightly. Thanks for waiting patiently!
Sandeep Maddipatla
Software Developer
AccelerEyes LLC
Atlanta, GA USA
E: sandeep@accelereyes.com
W: http://www.accelereyes.com
User avatar
sandeep
 
Posts: 224
Joined: Wed Jul 08, 2009 11:46 am


Return to [archive-commercial] Download & Installation

cron